Paint Rack Tower + Riser Gallery

Tool-free flat-pack. No glue, no screws, no clamps. Posted from Melbourne as finished printed parts that slot together by hand in minutes — and lift apart again just as easily. Nothing to sand, paint or glue.

Paint Rack Tower + Riser Gallery — up to 96 Paints, Flat-Pack Kit

The full tower plus the gallery on top — up to 96 paints on one desk footprint, every label visible, flat-packed with zero hardware.

• Capacity: up to 96 — the 51-paint tower (3 plate levels + 6 universal top wells) plus the riser gallery's 3 display shelves (up to 45 droppers, or swap in Citadel stagger shelves — 11 pots each)
• Shelf Setup option: choose your riser mix — all Vallejo/dropper shelves or mixed Vallejo + Citadel
• Anti-tip feet tested loaded; pin-locked riser rail grips the wing tops — no wobble
• Tool-free flat-pack: tabs, wedges and snap pins only; assembles in minutes, lifts apart just as fast
• Size: ~284 × 300 mm desk space, 833 mm tall assembled
• Printed to order in Melbourne from premium PLA · 14 colours

✦ Capacity, exactly — what holds what

The tower (51 paints) — for dropper bottles, e.g. Vallejo, Army Painter or AK paints:

• 3 plate levels — 15 bottles each (teardrop notch rows) = 45
• 6 universal wells on the top plate — each takes a Citadel pot OR a dropper = 6

The riser gallery on top (3 shelf slots, set by your Shelf Setup choice):

• Vallejo shelf: 15 dropper bottles (e.g. Vallejo, Army Painter, AK)
• Citadel stagger shelf: 11 pots

Totals per Shelf Setup:

• 3 Vallejo: 45 droppers → 96 paints total
• 2 Vallejo + 1 Citadel: 30 droppers + 11 pots → 92 total
• 1 Vallejo + 2 Citadel: 15 droppers + 22 pots → 88 total
• 3 Citadel: 33 pots → 84 total

Every shelf uses the same click-in interface — you can rearrange or add shelves any time.

Vallejo, Army Painter, AK and Citadel are trademarks of their respective owners (Citadel is a trademark of Games Workshop Ltd); Formada3D is not affiliated. Note: the tower (bottom section) itself fits dropper bottles only — Vallejo, Army Painter, AK size. Citadel pots do not fit the tower; they live on the riser gallery up top via the Citadel stagger shelves.

What material is the Paint Rack Tower + Riser Gallery printed in?
Printed in plant-based PLA — made from renewable plant sugars (corn & sugarcane), not petroleum — with a lower carbon footprint than traditional plastics. Every order is printed to order in Melbourne, so there's no mass-production waste and nothing sitting in a warehouse.

How long does shipping take?
Australia: $10 standard / $15 express, free standard shipping over $100 · New Zealand: $15 · United States: $20 · Other countries: $25. Every item is printed to order and ships in 3–5 business days from Melbourne. Returns per Australian Consumer Law — if it arrives faulty or not as described, we make it right.

Where is it made?
Designed and 3D printed to order in our Melbourne, Australia workshop.

What's your returns policy?
Returns are handled per Australian Consumer Law — if it arrives faulty or not as described, we make it right.