Gothic Ruins Folding Set — Combo Pack, Everything (STL or Printed)

Every piece of the Gothic Ruins Folding Set in one order. All four folding buildings, the full tournament footprint of base plates, and both prop sets -- everything needed to build the complete table.

• 4 folding buildings: Bell Tower, Large Ruin, Small Ruin and Triangle Ruin -- each with print-in-place hinges (7.0 mm octagonal knuckles, 2.60 mm rod bore) so the whole set folds flat for storage and unfolds rigid for the table.
• Full base plate set, all 5 sizes: 7×11.5in ×4, triangle 8×11.5in ×2, 6×4in ×4, 10×2.5in ×2, 6×2in ×4 -- the complete measured tournament footprint.
• Both prop sets: cracked column (2-part), twist-lock floor disc, loose rubble, colonnade, barricade, pipe run (plus hex alt), broken column debris.
• 30 OpenLOCK clips (24 standard + 6 grip) so every piece locks to the wider OpenLOCK ecosystem.
• Compatible with the 11th edition tournament layout.
• Designed and 3D printed in Melbourne, Australia.

Two ways to buy -- pick one above:

STL files (instant download). Every wall/floor/brace object as STL + 3MF for the four buildings, print-ready 3MF plates for the base plates and props, corner test coupons for each building, and the print settings sheet. Personal-use licence.

Printed & shipped. We print the complete set here in Melbourne at 0.2 mm layers, no supports, fit every hinge pin, check every fold, and post it to you. The biggest box we ship.

Pins: hinge rods are snipped 1.75 mm filament. STL buyers cut their own from any spool -- nothing is included with the files. The printed version ships with every pin already fitted.

Base plates: all 5 sizes now ship as individual STL files (split from the print-ready plates) as well as the nested print plates, so you can arrange them yourself or print straight from the plate.

Personal use licence on the files: print as many as you like for your own tabletop; the files and prints may not be resold or redistributed.

What material is the Gothic Ruins Folding Set — Combo Pack, Everything (STL or Printed) printed in?
Printed in plant-based PLA — made from renewable plant sugars (corn & sugarcane), not petroleum — with a lower carbon footprint than traditional plastics. Every order is printed to order in Melbourne, so there's no mass-production waste and nothing sitting in a warehouse.

I can buy this as files or printed — what is the difference?
Pick the format above. STL files are an instant download after checkout — nothing is posted, and you print it yourself. Printed & shipped means we print it here in Melbourne and post it to you; that option collects a delivery address at checkout.

How do I get the files if I choose the STL option?
They are delivered as an instant download the moment checkout completes — a download link on the thanks page and in your order email. Nothing is shipped for that option.

How long does the printed version take?
Australia: $11 standard / $15 express · United States: $20 flat. Every item is printed to order and ships in 3–5 business days from Melbourne. Returns per Australian Consumer Law — if it arrives faulty or not as described, we make it right.

Where is it made?
Designed and 3D printed to order in our Melbourne, Australia workshop. The files are a personal-use licence with print settings included.

What is your returns policy?
Printed goods: returns per Australian Consumer Law, and if it arrives faulty or not as described we make it right. Digital files are covered by the same law — email [email protected] if a file is faulty or not as described.