Citadel 28 Monolith + Wall Riser Combo — 64 Citadel Pot Wall Rack, Zero Bench Space

Arrives finished. No glue, no clamps, no Saturday. Printed as one solid piece and posted from Melbourne ready to use. Flat-pack MDF racks arrive as a kit — wood glue and clamps you supply yourself, a couple of evenings of assembly, and drawers that wear out. This is not that.

The complete Citadel gallery: the Citadel 28 Monolith and the Wall Riser together — 64 Citadel pots on a wall footprint just 122 mm deep. Hang the whole thing on the wall and use zero bench space at all.

The Monolith body holds 28 Citadel pots labels-up in angled round ports. The Wall Riser rail plate and Left/Right posts clip onto the Monolith's top edge — no screws — and carry three Citadel stepped shelves (12 pots each) for another 36 pots, taking total capacity to 64 Citadel pots.

This combo ships WITHOUT the wedge drawer by default. Add it as an option below (choose Left or Right pull) if you want the hidden storage drawer built into the Monolith's base — same friction wedge-fit drawer sold on the standalone Monolith listing, no hardware, nothing to glue.

• Capacity: 64 Citadel pots (28 in the Monolith body + 36 across 3 riser shelves)
• Footprint: 274 mm wide × 122 mm deep, wall-mounted — zero bench space
• Drawer: not included in the base combo — add the hidden full-width wedge drawer as an option (Left or Right pull), friction wedge-fit close, no hardware
• Riser: Wall Riser rail plate + LEFT/RIGHT posts + 3× Citadel stepped shelves (12 pots/shelf)
• Mounting: keyhole hangers, screws into studs or plugs (not included)
• Assembly: flat-pack riser, wedge-locked, no glue or hardware

Where a wedge drawer is visible in these photos it is the optional add-on, fitted so you can see how it looks — select the Wedge Drawer option above if you want it; the base combo ships without it. Every photo here is a real camera photo of the printed parts — no renders.

Citadel is a trademark of Games Workshop Limited; Formada3D is not affiliated. No hardware or paints included.

What material is the Citadel 28 Monolith + Wall Riser Combo — 64 Citadel Pot Wall Rack, Zero Bench Space printed in?
Printed in plant-based PLA — made from renewable plant sugars (corn & sugarcane), not petroleum — with a lower carbon footprint than traditional plastics. Every order is printed to order in Melbourne, so there's no mass-production waste and nothing sitting in a warehouse.

How long does shipping take?
Australia: $11 standard / $15 express · United States: $20 flat. Every item is printed to order and ships in 3–5 business days from Melbourne. Returns per Australian Consumer Law — if it arrives faulty or not as described, we make it right.

Where is it made?
Designed and 3D printed to order in our Melbourne, Australia workshop.

What's your returns policy?
Returns are handled per Australian Consumer Law — if it arrives faulty or not as described, we make it right.