How to assemble the Paint Rack Tower

How to assemble the Paint Rack Tower: an interactive 3D guide in 5 steps. Turn, zoom and explode the model, then build it step by step.

1. Step 1 · Base wings. Stand the Base Wing LEFT and RIGHT upright with the slots facing each other and the feet pointing backward. The feet end level with the back of each wing, so the tower doesn't tip. No glue, no screws anywhere in this kit.
2. Step 2 · Base plate. Slot the Base Plate's side tabs into the lowest row of slots, one in each wing. Lock it with the 2 SHORT wedges: push one down through the slot in each tab, just outside the wing. The short wedges are for the base plate only.
3. Step 3 · Shelf plates. Slot the two Shelf Plates into the next two rows the same way, with the bottle-catch arms at the front. Lock each one with 2 Wedge Locks (the taller wedge), 4 in total. Tap each wedge until it's snug. You can re-tighten them any time.
4. Step 4 · Top plate. Fit the Top Shelf Plate into the top row of slots, with its 6 universal wells. That's the whole tower: 2 wings, 4 plates and 6 wedges.
5. Step 5 · Done. Load your paints. It holds up to 51 paints: 15 dropper bottles on each of the 3 plate levels (45) plus the 6 top wells, which each take one Citadel-size pot or one dropper bottle. Fits: dropper bottles (Vallejo, Army Painter, AK, Scale75, Two Thin Coats). It takes apart again just as easily. Want more room? The Riser Gallery add-on fits on top.

Buy the Paint Rack Tower · All assembly guides · Formada3D home